DRIP IRRIGATION SYSTEM FOR 10 POTS

DRIP IRRIGATION SYSTEM FOR 10 POTS

The Drip Irrigation System for 10 Pots is designed to provide an efficient and water-saving irrigation solution for small home gardens, balconies, and indoor plants. It ensures each plant receives the right amount of water at its roots, promoting healthy growth.

INSTALLATION GUIDE

Step 1: Plan the Layout

Arrange your 10 pots in a row or a pattern that suits your space.

Measure and cut the 16mm main pipe to fit the pot arrangement.

Lay the 5-meter main pipe along the plant rows.

Step 2: Setting Up the Main Line

Connect the cock to the water source.

Attach the stile to the cock and connect it to the 16mm main pipe.

Use L-bows at corners if the layout needs directional changes.

Use T-connectors where branch pipes need to be connected.

Step 3: Installing the Drippers

Cut the 6mm pipe into sections for each plant.

Use the punch tool to make small holes in the main pipe at locations where you will attach branch pipes.

Insert pin connectors into the holes and connect the 6mm pipes.

Attach drippers to the end of each 6mm pipe and place them near the plant roots.

Step 4: Finalizing the Setup

Seal the open ends of the 16mm and 6mm pipes using caps and the end cap.

Attach the 4-way connector where necessary for efficient water distribution.

Turn on the water supply and check for leaks.

Adjust drippers as needed to ensure equal water flow to all 10 pots.